Bambu Lab H3C 3D Printer

The Bambu Lab H3C is a tool-changer 3D printer: nine PrintTools, each with its own filament path and heater, swap in seconds for true multi-material, multi-colour printing with very little purge waste.

Key features

• Nine PrintTools with Swaptek: a 3.4 second tool change and about 6 seconds from one material printing to the next. Active Pre-Heat warms the next nozzle while the current one is still printing.
• 9-material printing, low purge waste: every material stays loaded and ready, no need to unload one filament to load another.
• CMYKW colour mixing: five PrintTools blend cyan, magenta, yellow, black and white for full-spectrum colour (with Bambu PLA Palette CMYKW).
• Soft TPU up to 3x faster (Bambu Lab's figure) with FlexFeed, which handles both 1.75 mm and 2.85 mm filament.
• Mixed nozzle sizes: fine detail with a 0.2 mm nozzle and speed with a 0.4 mm nozzle in the same print.
• AMS 3H included: a fully enclosed 9-slot filament system that loads automatically, with a built-in 2-slot dryer up to 85 °C for PA, PET and TPU. Connect existing Bambu Lab AMS units for up to 24 spools.
• Built for engineering materials: dual-zone active chamber heating up to 65 °C and hardened-steel nozzles up to 350 °C.
• Fast and precise: acceleration up to 25,000 mm/s² and travel speeds up to 1,400 mm/s, with a toolhead 40% lighter than the H2D's.
• More than 3D printing: optional CutTool, DrawTool and DebossTool mount and switch the same way (sold separately).
• Easy to use: automatic tool calibration and bed levelling before every print, and AI vision that spots spaghetti, purge-bin jams and clogs.

What's in the box

• H3C Combo: Bambu Lab H3C, AMS 3H, Bambu Bus cable, Textured PEI build plate, 0.4 mm PrintTool and 0.4 mm PrintTool for 2.85 mm filament.
• Combo with Filament Starter Pack (TPU + CMYKW or Colourful TPU + CMYKW): the Combo plus a Bambu PLA Palette CMYKW set and TPU filament to start straight away.
• Full Combo, Bambu Station L Frame Edition: also includes the Bambu Station L, which lifts the H3C to a comfortable working height with storage underneath for tools and filament.

Sold by GRP 3D, an independent UK retailer of Bambu Lab products, from our shop in Aberbeeg, South Wales. Not in stock right now? You can still order: we order it in for you, so delivery may take a little longer.