Which filament do you need? Answer two quick questions and we'll point you to the right material, the filament we sell for it, and whether it suits your printer.
TPU bends instead of snapping. Ordinary TPU is too soft to feed reliably through an AMS, so Bambu Lab makes TPU for AMS (Shore 68D) that works in all AMS units, including the AMS lite.
Filament we sell for this
Bambu Lab TPU for AMSfrom £29.99Tough yet flexible, Shore 68D. Not for a 0.2 mm nozzle; dry before use.
Your printer
Any printer will do. The H3C's FlexFeed extruder also takes 2.85 mm TPU for very soft grades. Compare Bambu Lab printers.
TPU must be dried before use (Bambu Lab). The AMS 2 Pro may not dry TPU fully – use an AMS HT or the printer's heated bed.
PLA is the easiest filament to print, comes in the widest range of colours and finishes, and warps very little. Bambu Lab calls PLA the default filament for most 3D printers.
Filament we sell for this
Bambu Lab PLA Basicfrom £15.99Easy-to-print, smooth finish. Refill or on a spool.
Bambu Lab's beginner advice is to start with PLA and only move to other materials once you're confident. It prints at lower temperatures and gives predictable results.
Filament we sell for this
Bambu Lab PLA Basicfrom £15.99The everyday PLA. Buy it on a spool first, then switch to refills.
Bambu Lab rates PETG higher than PLA for strength and durability, and it's still easy to print. For stiff parts, carbon-fibre filled filaments are an option – they need a hardened steel nozzle.
Bambu Lab PETG-CFfrom £27.99Carbon-fibre PETG. Hardened steel nozzle needed; not for AMS lite.
Your printer
Any printer prints PETG. If you also want carbon-fibre filaments without changing parts, the P2S and H series come with hardened steel nozzles. Compare Bambu Lab printers.
PETG absorbs moisture more than PLA. Keep it sealed and dry it before use for the best finish.
For: outdoors (sun and rain) · Material: ASA (or PETG)
Bambu Lab describes its ASA as having excellent UV and weather resistance, ideal for outdoor parts. ASA needs an enclosed printer. On an open-frame printer, Bambu Lab's PETG Basic is the alternative: it has improved resistance to water, UV and temperature.
Filament we sell for this
Bambu Lab ASA£21.99UV and weather resistant. Enclosed printer required; not for AMS lite.
For ASA choose an enclosed printer: P2S, P1S or the H series. Any printer can do PETG. Compare Bambu Lab printers.
ASA comes on a high-temperature reusable spool. Bambu Lab lists ASA as not compatible with AMS 2 Pro drying – use an AMS HT or the printer's heated bed.
ABS and ASA cope with heat much better than PLA. Bambu Lab gives a heat deflection temperature (a lab test) of 100 °C for its ASA and 87 °C for its ABS. Both need an enclosed printer.
Filament we sell for this
Bambu Lab ASA£21.99HDT 100 °C (Bambu Lab figure), also UV resistant.
Bambu Lab ABSfrom £15.99HDT 87 °C (Bambu Lab figure), tough and durable.
Your printer
Choose an enclosed printer: P2S, P1S or the H series. For nylon and PC, Bambu Lab's H series is the best fit. Compare Bambu Lab printers.
ABS and ASA give off fumes while printing: use an enclosed printer with a filter, in a ventilated room.
For: easy-remove or soluble supports · Material: Support material or PVA
Support materials are used only for the layers that touch your model, so supports come away cleanly and leave a smoother surface. PVA dissolves in water.
